Vixen Observation Goods Lens Heater 360III
All pricing in USD
- Warming the lens to prevent from dewing
- Carbon heater with high heat efficiency is provided
- Curled power cord with USB type C connector
- Energy saving at 3W power consumption
- Self-adhesive soft fabric fastner
- Long strap type dew heater suitable for heating cylindrical surfaces
With the Lens Heater 360III you can prevent a camera lens from fogging that happens throughout the year in the wide-field astrophotography.
Use by wrapping the strip of the heating elements around the camera lens. The heating element is a carbon fiber heater used widely for its high thermal efficiency. A curly cord with USB Type-C female terminal is equipped. Perfect for prevention against dew of a camera lens, the objective lens of a telescope, or an eyepiece.
Dew condensation is a phenomenon that moisture becomes drops of water if the moistured air contacts an object having a temperature lower than its surroundings. Taking astrophotography at night often suffers from a fogging of the lens. The temperature and humidity decrease as the night progress and the camera turns to be colder than ambient temperature. In this situation, warming the lens using heating elements is essential to prevent fogging. The Lens heater 360 III is a must item for taking astrophotography or night photographs in the seashore, mountains, or cold regions.
The heater elements for the third generation of the Vixen lens heater 360III are carbon heaters of high thermal efficiency. It warms the lens efficiently at minimal power consumption. The temperature at a contact surface of the heating element is kept 10 degrees Celsius above the ambient temperature. (at 20 degrees C outside temperature and no wind.) It can fluctuate depending on the environment used.
The lens heater 360III comes equipped with a stretchable curl cord. Even if you caught the power cord by accident while taking a photograph, the curl cord could help in mitigating vibrations to the camera. The lens heater 360III has a USB Type-C connector for the power supply.
The lens heater 360III consumes electricity as low as 3 W (5V - 0.6A). It is possible to run it continuously for about 12 hours with a USB mobile battery of 10,000mAh, for instance. (at 20 degrees C ambient temperature.) The operating duration varies widely depending on the environment used.
The fabric fastener, which is soft as felt cloth, is made to be self-adhesive on the surfaces. You can take off the fabric fastener without adding extra force to it, unlike conventional fabric fasteners.
The lens heater 360III is made of a 30mm wide and 600mm long strap. It is possible to wind it on a cylindrical object easily. You can use it to warm a photographic lens or a dew shield of a telescope having a size less than 100mm in diameter.
|Heater type||Carbon fiber fabric heater|
|Temperature characteristics||10 degrees Celsius above outdoor ambient temperature (at 20 de.C, no wind)|
|Power source, Electricity consumption||USB, 5V 0.6A 3.0W|
|Power supply cord||USB A (male), USB-Type C connector detachable curl cord 20 cm to 50cm|
|Operating duration||About 12 hours with a 10,000mAh mobile battery fully charged (at 20 deg. C outdoor temperature)|
|Attachable dimensions||Cylindrical surfaces of 30mm in width and 45mm upto 100mm in outer diameter|
Vixen warranties its products to be free from initial defects in materials and workmanship for a specified period based on part type:
Vixen Electronic Parts: Limited One Year Warranty
Vixen Mechanical Parts: Limited Two Year Warranty
CA Residents: Prop 65 WARNING(S)